Burn error /USB back error.
1. If Burner and NVR are in the same data cable, then separate them. 2.…
NVR Randomly Rebooting or Shutting Down
Disconnect HDD and boot NVR. If NVR boots without HDD, then HDD has failed or…
System does not boot
Disconnect, reconnect power and video cables to system. Disconnect HDD and boot system. If system…
Video is distorted when searching local records.
There are following possibilities: Explanation: 1. If Video quality setup is too low then reconfigure…
Camera Feed is Blurry or Distorted
There are following possibilities: It maybe that the camera is out of focus. The real*time…
Video Loss on Multiple Cameras
There are following possibilities: Firmware may be old. Please upgrade to the latest version. Brightness…
Video Loss 1 Camera
There are following possibilities: Firmware is not compatible. You will need to upgrade to the…
There is no HDMI output.
If Display is not set in HDMI mode then set to HDMI. If The HDMI…
I can not connect to the IP camera
1. If you still cannot connect to the IP camera, then check if the DVR…
After I connected to the IP channel, there is no video output in the one window or the multiple window mode, but I can see there is bit stream
1. If you checked the steps above, then check the camera setup (such as IP…